H&S 4242, Руководство оператора

Страница: 27 / 42

-25-
VERTICAL BEATERS
BEATER REMOVAL
The beater attachment can easily be removed for various reasons
such as manure stock piling.
1. Remove bolts, nuts and lockwashers at the same location on
each side (A).
2. Disconnect the quick disconnect PTO from the gearbox under the
rear of the manure spreader and remove the rear half of the PTO.
3. The remaining portion of the rear PTO has a roll pin that must
be removed to slide the front portion of the PTO from the shaft.
4. After removal of both PTO halves, slide them together and store
them in a safe place.
5. Securely attach a lifting chain to the lifting eyes at the top of the
beater assembly (B).
6. Lift the beater assembly gently until alignment pegs are clear of
the alignment holes.
7. Store the beater assembly on level ground with blocking as not
to damage the drive system.
B
TIMING OF BEATERS
The beaters must be timed so the flighting of the opposite
beater is about halfway between the beater being timed.
If the beaters are not timed correctly, contact your H&S
dealer for timing instructions.
A