H&S 4142, Руководство оператора

Страница: 24 / 38

TIMING OF BEATERS
The beaters must be timed so the flighting of the
opposite beater is about half-way between the beater
being timed. To time the beaters, remove the top
shield and remove the chain coupling so the beater
can be turned to the proper position. Re-connect
the chain and re-install the shield.
ADJUSTMENTS
-22-
HORIZONTAL BEATER DRIVE CHAINS
Both beater drive chains can be adjusted by loosening bolts
(A) and sliding the poly tensioners toward the chain until
1/2” of deflection can be obtained on the opposite side (B).
Retighten the bolts (A) when deflection is obtained.
Shields Opened for Clarity
B
A
B
BE SURE ALL SHIELDS ARE SECURED INTO
PLACE PRIOR TO RE-STARTING MACHINE.
WHEEL HUBS
To adjust the wheel hubs, tighten the castellated nut on the spindle to the point where there is no
end-play and a slight drag on the bearings. Replace the cotter key with a new one of the correct size.
FAILURE TO FOLLOW
THE RECOMMENDED
ADJUSTMENTS WILL
VOID WARRANTY.
NOTE: PERIODICALLY LUBRICATE
ALL ROLLER CHAINS WITH A LIGHT
MACHINE OIL IF NOT EQUIPPED
WITH AN AUTOMATIC OILER.
Shields Opened for Clarity
VERTICAL BEATER DRIVE CHAINS
Vertical beater drive chains have a spring loaded tightener
system. If chains become loose, replace the worn chains
or check if the springs are stretched out or worn, replace.