H&S 3127, Руководство оператора

Страница: 24 / 32

GREASE ZERK LOCATION - Grease every 10 Hours
A. (3) PTO Shaft
B. (2) Front jack shaft bearings.
C. (2) Side shaft on S3123 (4) Side shaft on S3127
D. (2) Rear drive shaft (LH is a remote fitting)
E. (1) Rear drive shaft shear sprocket
F. (1) Beater bearing (RH side)
G. (2) Hydraulic endgate arms
H. (2) Transport wheel hubs (1 Zerk on each hub)
NOTE: Shields removed in some pictures for clarity. DO NOT OPERATE WITH SHIELDS REMOVED
-22-
C
D
F
D
A B
E
G
(Shields Removed for Clarity)
(Under Shield)
(Behind Shield)
LUBRICATION
H