H&S 24/26, Руководство оператора

Страница: 22 / 28

LUBRICATION
GENERAL INFORMATION
If lubricated properly and often enough, it will prolong the life of your Industrial Chassis. Grease daily
during normal use and before and after storage and after power washing. Use a good grade of
Lithium-base grease. Make sure that grease comes out around the shaft on sleeve type bearings. Wipe
off excessive grease to prevent accumulation of chaff or grit around bearing.
-20-
Become familiar with all lubrication points and establish a routine to ensure complete
lubrication of the Chassis.
IMPORTANT: Catch and dispose of fluid per local waste disposal regulations whenever service is
performed on hydraulic components, valves, cylinders, hoses, etc.
Swivel Hitch Zerk
Walking
Beam
Zerks
(Each Side)
Wheel
Hub
Zerk