4
H
2
365
Product manual
●
To protect the electrode and cleanse the bottle before the first use,
fill half of the bottle with water.
●
Fully charge the product before your first use.
The charge starts when the
red LED
is turned on the power
switch after the adaptor is connected. Once done,
the
green LED
will be turned on. (Two hours for charge.)
●
The recommended water temperature is 10 - 40℃.
Generally, lower the water temperature, the higher dissolved hydrogen.
Fully read instructions and caution before you start using the product.
Check before use.
➋
Touch the power switch once.
Once it starts operating, the blue LED will be turned off and
hydrogen bubbles will be generated. Once it gets operated,
the hydrogen bubble generation will automatically be stopped
after two minute long operation, and the LED will be turned off.
➍
When you use spring water, separate the hydrogen generator
and set the spring water connector I.
Use it by connecting it to the spring water bottle.
Spring water connector I : Standardized water bottles : Samdasoo, Icis, etc.
Spring water connector II : Use it when you are using
Chinese spring watter bottles. Kang Shifu, mineral water
Instructions
➊
Open the lid and fill in the water at inner lid height.
Do not go over 365ml for one time use.
➌
Refrain from continuous operation for more than twice.
You can have plenty of oxygenated water
with only one operation. (Twice)
➎
Condensed water can be a bit emitted via the condensed water emitter.
When there is a huge gap between the water temperature
and the surrounding temperature, there will be condensed water
as a result of dewfall and the condensed water can be
a little bit emitted via the condensed water emitter.
Twice
365㎖