Handlink WG-500P 24Roam, Руководство пользователя

Страница: 48 / 91

WG-500P Hotspot in a Printer
Protocol can be utilized to synchronize the
time on devices across a network. A NTP
Time Server is utilized to obtain the correct
time from a time source and adjust the local
time.
Server
IP/Domain
Name Empty Enter the IP address/domain name of NTP
server. The maximum allowed characters
length is 100.
Update Time 0 hours Enter the number of hours for update time.
Daylight Saving
Time Disable Enables or disables Daylight Saving Time
(DST).
Month/Day Set the Daylight Saving Time (DST) on the
WG-500P 24Roam. Adjust the begin time
and end time.
NAT (Network Address Translation)
NAT
Enable Enables or disables NAT Address
Translation function.
User Session
Limited Enable,300 Enables or disables user session limit
function. This feature provides you an
ability to control a number of sessions
allowed for particulars user(s) at the one
time.
IP Plug and
Play (iPnP
Technology) Enable Enables or disables plug & play function.
When
enabled, the user needn’t change
their network configuration to access the
Internet.
Layer 2
Isolation
Security Enable If enable plug and play is selected, you can
enable Layer 2 Isolation Security function.
When the “Layer 2 Isolation Security”
enabled, everyone cannot communicate
with each other.
Secure
administrator
IP Addresses Any Options: Any and Specify. Administrator
can specify 5 IP addresses or a range to
allow remote control access from network.
47