background image

Page 12

5. OPERATION

TO THE NEW OPERATOR OR OWNER

It is the responsibility of the owner or operator to read 

and understand this manual, the sprayer manual and 

the chemical container label before starting.  Follow 

all safety instructions exactly.  Safety is everyone’s 

business.  By following recommended procedures, a 

safe working environment is provided for the operator, 

bystanders and the environment.

Many  features  incorporated  into  this  equipment  are  the 

result of suggestions made by customers like you.  Read 

the manual carefully to learn how to operate the machine 

safely, and how to set it to provide maximum efficiency.  

By following the operating instructions in conjunction with 

a good maintenance program, your Handler will provide 

many years of trouble-free service.

OPERATING SAFETY

HOW THE SYSTEM WORKS

The handler consists of a plastic tank mounted near or on 

a sprayer or other water source unit, and a valve system 

plumbed for adding product to the machine.  A patented 

knife system is located inside the handler tank to puncture 

and split open the bottom of the product container

Fresh water enters the bottom of the container from a line 

through the side of the eductor tank.  Valves in the plumbing 

control the removal of the product and rinse mixture from 

the tank and allow fresh water to enter for rinsing the unit.

Mixing  and  removal  of  product  from  the  handler  unit  is 

accomplished using the plumbing package system utilizing 

a pump.

WARNING

1  Read and understand the Operator’s Manual and 

all safety signs before operating, maintaining,    

adjusting or unplugging the Handler.

2  Read chemical manufactures’ warnings, instructions, 

and procedures before starting and follow them exactly.

3  Do  not  put  hands  into  the  Handler  when  adding 

chemicals.

4  Wear safety goggles, rubber gloves and protective 

clothing  whenever  working  with  the  Handler  or  on  a 

machine or a component containing toxic chemicals.

5  Keep all shields and guards in place hen operating.

6  Clear the area of all bystanders, especially children, 

before starting.

7  Review safety instructions annually.

WARNING

When using a gas or diesil engine always check fuel 

and oil level before starting the engine.

Read manufacturer’s owner manual for further instruction 

on use and maintenance of engine.

Содержание IV


























Отзывы: