2 X AA ALKALINE BATTERIES ARE RECOMMENDED (Batteries not included)
INSTALLING THE BATTERY
LOW BATTERY PROTECTION
Remove the battery cover-keep the battery compartment dry-install the 2XAA Battery by
lining up the connections.
Place the battery inside the compartment and reinstall the battery cover.
NOTE:
When installing the battery, press the battery cover to the end. If the battery cover
is flush with the case, the battery cover is installed correctly. If the battery cover is higher
than the case, it means that it is not in place, and it may cause water ingress to
short-circuit on rainy days.
NOTE:
When the battery is first connected. it takes up to 1 minute for the battery
indicator to assess the battery strength.
NOTE:
Please use standard batteries that meet the quality requirements. Inferior batteries
will leak and corrode equipment.
NOTE:
Remove the battery if the timer is not used for an extended time.
When the low battery indicator appears on display. the valve will close automatically to
avoid leakage. Please replace the battery in time in case of interrupting the normal
operation.
2
