The StretcherSling Disposable can only be applied and removed when the patient is
lying down.
1. Turn the patient towards you. Place the Stretcher-
Sling Disposable so that the product label is facing the
underlying surface and the sling’s mid-section follows
the patient’s spine.
The upper edge of the StretcherSling Disposable
should support the head.
Place the edge of the sling as far in under the patient
as possible. Guide the loops under, so that you can
reach them once you have turned the patient back
onto the StretcherSling.
2. Turn the patient back onto the sling and pull the
sling out from the other side with the help of the straps.
3. If necessary: Adjust the width of the StretcherBar to
fit the patient’s width by pulling out the lift hooks.
Then, hook the lift loops onto the bar.
4. Raise the lift until all loops are fully extended. Pause
to ensure that everything is as it should be before rais-
ing the patient clear of the underlying surface.
5. If the patient is not balanced after being lifted from
the underlying surface, this can be corrected turning
the balance regulator.
Removal of the StretcherSling Disposable:
1. Release all suspension hooks from the lift and move
it out of the way. Turn the patient toward you and tuck
the StretcherSling Disposable in under itself against
the underlying surface.
2. The fabric slides against itself when you pull out
the StretcherSling Disposable, after turning back the
patient.
3
M A N U A L
System
RoMedic
TM
1
2
3
1
2
5
4
