Product description, SlingBarSpreader M
SlingBarSpreader M is made of aluminium.
SlingBarSpreader M is used in combination with Handicare-approved overhead and mobile lifts. The lift hooks are
equipped with safety latches.
SlingBarSpreader M is always used in pairs in combination with a Handicare-approved slingbar.
Important information!
•
SlingBarSpreader may only be used in pairs.
•
Suspension loops must not be twisted.
•
May not be used as a slingbar and coupled to the link on the lift unit.
•
Place the SlingBarSpreader so that the head symbols on are on the same side on the slingbar.
•
The sling’s back loops must always be hooked to the lift hook, which is marked with a head.
Assembly
Hook the suspension loops to the lift hook on the slingbar. Do the same on the other side.
Note!
Check to ensure that the head symbols on the SlingBarSpreader are on the same side on the slingbar.
Head
Use
Fit the sling to the patient (see the user manual for the sling model that is being used).
Place the sling’s back loops on the side of the SlingBarSpreader M that is marked with a
head symbol. Leg sections are place on the other side.
Note! When using a sling with 3-point suspension, the middle loop is placed on the
same side as the back loops. They must not be placed on the slingbar to which the
SlingBarSpreader M attached.
2
M A N U A L System
RoMedic
TM
Head
Head
