English
ReTurn7500 and ReTurn7400 are used indoors for shorter transfers between wheelchair and bed, wheelchair and toilet/
portable toilet/wheelchair or chair/armchair. ReTurn7500 and ReTurn7400 can also be used to aid repositioning farther
back in the chair. Both models are designed for easy manoeuvring and use in confined spaces. They are easy to assem-
ble and disassemble in just two sections for easier transport and storage. ReTurn7500 is available in two versions. One
model has an opening at the upper vertical handle for hooking of ReTurnBelt. ReTurn7400 is lower than ReTurn7500 and is
designed mainly for children and short adults.
SystemRoMedic is a series of different models of transfer assistive devices. The choice of assistive devices depends on
the transfer situation and the patient’s functional capability and needs.
Visual inspection
Check the condition and function of the product regu-
larly. Check to ensure that material is free from damage.
If there are signs of wear, the product must be inspect-
ed and serviced.
Always read the manuals for all assistive devices used during
a transfer.
Keep the manual where it is accessible to users of the product.
Do not leave the patient unattended during a transfer situation.
The product should be inspected yearly, and otherwise as
required, by a qualified technician. Service must be
performed by a qualified technician.
Functional inspection
Always read the manual
A. Push the rising ladder/
tube down into the mount-
ing fixtures on the chassis,
so that the height-adjust-
ment buttons are facing
towards the caregiver.
B. Insert the fixture knobs
and tighten. Check to
ensure that the fixture
knobs are securely tight-
ened before using the
ReTurn.
Assembly
• ReTurn is intended for shorter transfers.
• Return can only be used on flat floor.
• The caregiver must always apply counter pressure in a safe
way when the patient is standing up, sitting down and during
the actual transfer.
Note!
Always perform a risk assessment before using ReTurn.
Special requirements and conditions
Transport
The chassis and raising
ladder can be carried
separately. Carry the
chassis by holding the
tube on the front end of
the product.
Transport, e.g., by car,
and storage are easy,
since the ReTurn can
be disassembled in two
pieces.
To transfer with ReTurn, the patient must be able to:
• support weight while standing
• stand up and maintain balance (with support)
• grasp handles
• understand instructions
NOTE! Increased tipping risk.
If ReTurn7400 is used for patients of normal height, it is essen-
tial that the patient can support his/her weight while standing
and can maintain balance for a prolonged period.
A
B
3
M A N U A L
System
RoMedic
TM
System
RoMedic
TM
ReTurn7500/ReTurn7400
