background image

Safety       5

Sedeo Pro+

1 2

3
4

5 6 7

8

9

9

2 Safety

 Warning!

Always follow the instructions given next to 
the warning symbols! Failure to follow these 
instructions may result in physical injury, 
damage to the wheelchair or damage to the 
environment. Where possible the warning 
symbols have been placed in the applicable 
paragraphs.

Be carefull when swing away/fl ip up parts. 
Contact with moving parts should be 
avoided.

Take care when smoking. 

Do not use wheelchair near open fl ame.

 Caution!

Parts of the wheelchair that are intended, for 
service or repair, to be removed without the 
use of tools (e.g. armrest, legrest) can have 
an adverse effect on the support of the user 
if they are missing or not placed back in the 
right position.

2.1 Temperature

 Warning!

Avoid exposing the wheelchair to direct 
sunlight for extended periods of time. Some 
parts of the wheelchair, such as the seat, 
the backrest and the armrests assembly, 
complete, can become hot if exposed to the 
sun for too long. This may cause burns or 
skin irritation.

2.2  Indications on the seating system

The wheelchair must not be lifted 
up by the armrests assembly, 
complete and/or legrests. 

The stability of the wheelchair is 
infl uenced by the adjustment of the 
seating system's centre of gravity. 
Such adjustments should be made 
by professionals only.

2.3 Moving 

parts

 Warning!

Contact with the moving parts of the 
wheelchair should be avoided. A wheelchair 
has moving and rotating parts. Contact with 
moving parts may result in serious physical 
injury or damage to the wheelchair.

Moving/rotating parts:
1.  Electrically tilt adjustment
2.  Electrically high/low adjustment
3.  Electrically reclining backrest
4.  Electrically reclining antishear backrest 
5.  Electrically elevating legrests
6.  Electrically elevating central legrest
7.  Electrically elevating central legrest and electric 

height adjustment

8. Flip-up armrests
9.  Wheels (turning and pivoting)

Содержание SEDEO PRO+





































Отзывы: