Functional inspection
Check to ensure that the OneWaySlide lies securely on the seat cushion. A rough mate-
rial on the top of the seat cushion gives the best result.
Place the OneWaySlide as indicated by the arrow on the product label and allow it to
hang about 10 cm over the front edge of the cushion.
NOTE! Place OneWaySlide according to instructions on product label. Incorrect place-
ment may entail a risk of the patient sliding out of the chair.
Placement of OneWaySlide
Test OneWaySlide’s friction by rolling it and noting how easily it glides. Check to ensure that it
resists movement in the opposite direction. If possible, compare with a new OneWaySlide.
Using OneWaySlide
If the patient slides forward in the wheelchair, the caregiver
can help them to lean forward and provide counter pressure,
thereby enabling the patient to slide back in the chair.
Make sure the knees are raised to the same level as the hips.
This can be done with the aid of a FootStool.
Material:
Polyester, polyamide, cotton
Size
2069
50 x 40
2070
50 x 45
Care of the product:
Read the product label.
Do not use rinsing agent. To en-
sure maximum material life, hang
dry or tumble dry on low heat.
When in doubt, contact your RoMedic representative for product trials, advice or information.
If you require additional information, contact your transfer specialist or our representative, or visit www.romedic.com. Make
sure you always have the most recent version of the manual. Manuals are available for downloading from our website;
http://www.romedic.com
RoMedic AB
Box 640 Tel: +46 (0)8-594 773 33 Internet: www.romedic.com
SE-175 27 Järfälla Fax:+46 (0)8-594 773 44 E-mail: [email protected]
SWEDEN
