18
U S E R M A N U A L
Guidance and manufacturer’s declaration - electromagnetic emissions
Emissions test
Compliance
Electromagnetic environment - guidance
RF emissions CISPR 11
Group 1
This equipment uses RF energy only for its internal functions. There-
fore its RF emissions are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
This equipment is suitable for use in all establishments, including
domestic establishments and those directly connected to the public
low voltage power supply network that supplies buildings used for
domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/flicker
emissions
IEC 61000-3-3
Complies
Guidance and manufacturer’s declaration - electromagnetic emissions
Immunity test
IEC60601-1-2 test level
Compliance
Electromagnetic environment - guidance
Surge
IEC 61000-4-5
±1kV differential mode
±2kV common mode
±1kV differential mode
±2kV common mode
Mains power quality should be that of a typical
commercial or hospital environment.
Voltage
dips, short
interruptions
and voltage
variations on
power supply
input lines IEC
61000-4-11
Voltage reduction in
% of UN: 100% for 1
period, 100% for 0.5
periods, 30% for 25
periods, 100% for 250
periods
Voltage reduction in
% of UN: 100% for 1
period, 100% for 0.5
periods, 30% for 25
periods, 100% for 250
periods
Mains power quality should be that of a typical
commercial or hospital environment. If the user
of the MiniLift160Classic requires continued
operation during power mains interruptions, it
is recommended that the MiniLift160Classic be
powered from an uninterruptible power supply
or a battery.
