Handicare IBIS XA, Руководство по обслуживанию

Страница: 14 / 64

Maintenance
Version 2015v1 14
1.4.2 Replacing a fork
Replace the fork as follows:
•
Remove the wheel from the fork; see 'Replacing a wheel'.
•
Remove screw (A) with a Phillips screwdriver.
•
Remove cap (B).
•
Loosen bolt (C) using a 19 mm box spanner and prevent
nut (D) from moving with a 19 mm ring spanner.
•
Take fork (E) out of the frame.
Take care not to lose the washers (F).
Mount the fork in the reverse order.
Use a locknut M12 Precote 80. The small height of the
locknut allows to insert the hex bolt top to bottom and fasten
the locknut from the bottom side. Use a torque of 70 to 80
Nm to fix the nut.
Attention:
The locknut may not be used again – use a
new one when replacing.
1.5 Cleaning
Removing dry dirt
Upholstery, metal parts and frame parts can usually be cleaned easily with a dry soft cloth.
Removing mud and/or other wet dirt
Parts that are soiled with wet dirt can best be cleaned by first wiping the dirty parts with a wet sponge and then
wiping them dry with a dry soft cloth.
Upholstery
Cleaning with a damp cloth and household soap. After removing the dirt the cleaned parts should be wiped dry with
a soft dry cloth.
-
Never use abrasive or aggressive cleansers. They may damage the wheelchair.
-
Also do not use organic solvents such as thinner, dry-cleaning naphtha, or white spirit.
-
Upholstery: do not dry clean, iron or spin dry.
D
E
F
B
F
C
A