Handicare Exigo 20, Руководство пользователя, Страница: 17 / 36

17
A
B
A
70º
80º
90º
MB3196-EN
Figure 31
Figure 32
Adjusting the length of the leg
supports
Figure 31
The leg supports have a graduated scale
(31A) on the outside which will help you
to get the correct length. Adjust the length
of the leg supports by unscrewing the
fastening screws (31B) about 5 mm. Then
adjust the leg supports to the desired
length and retighten the screws.
Adjusting the angle of the leg
supports
Figure 32
The angle of the leg supports can be set
to 70˚, 80˚ or 90˚.
• Undo the screw (32A)
• Push or pull the leg support to the
desired angle
• Insert the screw into the correct hole
and tighten
Adjusting the seat depth
Figure 33
You can adjust the seat depth by up to 5
cm by moving the seat fabric forwards or
backwards.
• Loosen the seat fabric
• Pull the seat fabric forwards to
lengthen the seat or backwards to
shorten it
• Fasten the seat fabric again
Figure 33
Adjusting the wheelchair