handi quilter Simply Sixteen, Руководство пользователя

Страница: 16 / 21

Simply Sixteen User Manual 1.1 Page 14
POD Controls
(for controlling the machine from the rear)
The front handlebar MUST BE INSTALLED for the
Simply Sixteen™ to function correctly.
Note: When the machine is stopped, pay attention to
the position of the needle when pushing Needle Up or
Needle Down. Where the needle begins will determine
the effect of the Needle Up and Needle Down controls.
Function
INDICATOR LIGHTS
Power On Light
Needle in Motion Light
This GREEN LED light is illuminated to indicate that the machine is
plugged in and power is on.
This RED LED light is illuminated when the needle should be moving.
Note: Caution should be taken when the needle is in motion. If the
RED light is on and the needle is NOT in motion, this indicates a
MOTOR STALL condition has occurred. Turn off the power to the
machine and clear the cause of the stall (thread lock, tight hand
wheel, material too thick, etc).
NEVER WORK AROUND THE NEEDLE
WHILE THE RED LIGHT IS ON. TURN THE POWER OFF FIRST.
NEEDLE STOP CYCLE
Needle Up
Needle Down
If the needle is in motion (the red LED light is on), push to stop the
machine in the needle up position.
Half Stitch: If the machine is stopped in the needle down position ,
push the needle up button to produce a half stitch (the machine will
make a half stitch and stop with the needle up).
Whole Stitch: If the machine is stopped in the needle up position,
push the needle up button to produce a full stitch (the machine will
make a full stitch and stop with the needle up).
If the needle is in motion (the red LED light is on), push to stop the
machine in the needle down position.
Half Stitch: If the machine is stopped in the needle up position ,
push the needle down button to produce a half stitch (the machine
will make a half stitch and stop with the needle down).
Whole Stitch: If the machine is stopped in the needle down
position, push the needle down button to produce a full stitch (the
machine will make a full stitch and stop in needle down).
Start
Starts the machine.