handi quilter HQ Sweet Sixteen, Руководство пользователя

Страница: 15 / 42

Page 8
HQ Sweet Sixteen User Manual
Setting Up the Table (and Taking it
Down for Storage)
Check that the On/Off switch (page 7, Figure 3, #23) is
turned off (the 0 setting). Plug the power cord into the
top power outlet on the back of the machine (Figure 4).
Do not plug the power cord into a power source at this
time.
The lower power connector is available for powering fu-
ture attachments as they are developed by Handi Quilter.
(Not yet available.)
Installing the Power Cord
1. Plug in the foot pedal cord end into the foot pedal con-
nector (see page 7, Figure 3, #26).
2. Place the foot pedal under the table where operator
can reach it from the front of the machine.
The HQ Sweet Sixteen table has been designed to accom-
modate the HQ Sweet Sixteen machine. It has folding
legs that are height-adjustable and is heavy enough to
provide stabilization for quilting at high speeds.
1. Open the box and gently remove the table, taking care
not to drop the table on the fl oor. The table weighs nearly
50 pounds, so it is recommended that you ask someone
to help.
2. Unfold the legs, pulling on the horizontal braces until
the legs snap into place. Set the table upright.
3. Make the table taller by pinching the two height-
adjustment tabs on each set of legs and lifting on table,
while holding legs down with foot. Make the table shorter
by pinching the same tabs and pushing down on the
table.
4. To store the table, remove machine and return legs to
their lowest position.
5. The legs are attached to the table top with brackets of
two different sizes. One is longer than the other. Identify
the long and the short leg brackets.
6. Fold in the short bracket leg fi rst. Push on the hori-
zontal braces to loosen the legs and push them back
toward the table top.
7. Repeat with the long bracket leg.
Installing the Foot Pedal
Placing the Machine in the Table
1. We recommend having someone help lift and place the
machine.
2. Lift the machine by putting one arm through the
throat space.
3. Guide the machine from the back of the table into the
slot. Machine is positioned correctly when the back of the
machine is fl ush with the back of the table.
Figure 4