HandHeld Transaction Team TT8500, Руководство для стартапов

Страница: 60 / 68

I-Appendix - 2 Transaction Team™ TT8500
Cancel Does not enter a password, and exits to the initial power up screen.
Clear Clears entry in case of error.
Enter Accepts the entered password.
If the passwords were entered properly, these messages appear:
Passwords set, but NOT saved
Enter Setup to save
Press the pad to return to the login screen. Touch the pad again and the key
loading screen appears with the message:
Ready for Key Loading
Touch the pad again to enter the main Setup screen. Touch Accept to save the
passwords.
If there was an error in password entry (either the password was not entered and
confirmed properly, or the Cancel button was pressed at any time), the message
Passwords NOT set appears. Press the pad to return to the power up screen.
Your passwords are not saved.
Key Loading
Once you are logged in and your passwords are entered, the key loading screen
appears with the message:
Ready for Key Loading
This indicates your key loading software is enabled. It will run on the main host
serial connection configured for 9600 baud, even parity, one stop bit (regardless
of setup settings). Follow any commands that appear. To complete the key
loading and save any password changes, go to the Setup menu and press
Accept.
Change Keys Password
Press the Change Keys Password button to change or clear the existing key
loading passwords. If passwords already exist, you must login to change the
passwords. See
Load Keys (page I-A-1) for instructions.
Other Setup
Other Setup exits to the initial power up screen.