HandHeld Nautiz X3, Быстрый старт

Страница: 8 / 12

8
1. Open the application Notes in the NAUTIZ X3.
2. Holding the scanning button turns on the aiming pattern which helps to point at a
target. Move the aiming pattern to the centre of a barcode area. The laser beam
indicates that scanning is in progress. If an alarm goes off and the laser is turned off,
this will indicate that the barcode was successfully decoded.
3. Release the scan button.
4. Settings can be found in the Barcode Admin application. Password for Admin is 23646.
Scanning barcodes
1. Open the application Notes in the NAUTIZ X3.
2. The laser beam comes out of the end of NAUTIZ X3, whilst the scan button is held. The
red scan beam should cover the entire barcode. The laser beam indicates that scanning
is in progress. If an alarm goes off and the laser is turned off, this will indicate that the
barcode was successfully decoded.
3. Release the scan button.
Image scanning
Correct
Incorrect
Correct
Incorrect