Algiz XRW User’s Manual
- 8 -
Chapter 4 – Gett
ing Your Device Ready
1.
Make sure that your device is either connected to AC power or a battery that
still has power.
2.
Press the power button to turn on your ALGIZ XRW.
1.
Plug in the AC Power
1.
Plug the DC power cord of the AC adapter
into the power connector of the device
2.
Plug the female end of the AC power cord
into the AC adapter and the male end into
an electrical outlet
3.
Slide the power switch to boot the system
2.
Installing Battery Pack
1.
Push the latches aside to install / release
the battery to the battery compartment
Caution
Before you use your ALGIZ XRW, you will have to charge the battery packs as
soon as ALGIZ XRW is connected with the external power source. Please fully
charge the battery in advance of operating ALGIZ XRW. The new battery packs
must be 100% charged before ALGIZ XRW is disconnected from the external
power source. It takes few hours to fully charge the battery when ALGIZ XRW
is turned off.
1
2
