SF-828 operation manual
issue 1 17.08.22
P.7 of 12
Boot test
Check the upper and lower wheel pressure
Adjust the top of the cylinder adjustable screw and lock cover
Press the foot switch of upper and lower mold at the same time
Gradually adjust the distance between the cutter wheel and the lower mold to change
the pressure until you can completely cut the current work piece. (as shown in Figure 4);
A: the role of adjustable cylinder screw: adjust the distance between the upper wheel
and the lower mold, to changing the working pressure;
B: the role of the lock cover: when the knife wheel and the lower mold spacing is
better, tighten the fixed cylinder screw.
Fig. 4
The choice and installation of the jet nozzle
1) The choice of jet nozzle: The machine is equipped with two jet nozzle,
according to different functions to choose a different jet nozzle, sticking strip
function is a separate nozzle,
overlap, wrapping and hemming is a separate
nozzle.
adjustable screw
lock cover
