AI-006 operation manual
release 12.10.29 R01, HMI version 25, plc version 107>, servo version 102>
P.17 of 44
>
Control Method
>> Touch Screen Control Panel
Almost all settings and timing control of the machines can be input from the touch screen
control panel. Use you finger tip to touch the parameter to be modified. Switch to different
pages to modify other parameters (refer to section on control menu navigation). The screen has
a protective cover to prevent the surface from damage and scratch, however, avoid using
excessive force when touching the panel. You can also change the contrast of the display so as to
obtain the best picture when viewing at a different angle.
>> Foot Switch
There are 2 foot pedals for the machine. The design of these pedals is such that they can be
operated either individually or in combination to achieve a number of preset tasks by the
operator’s feet only. As a result, the operator’s hands are free to manipulate the processing
fabric.
Left foot pedal
The left pedal is a multi function pedal. You can use it to raise the upper roller, start sealing
and change the speed of sealing.
To raise the upper roller - heel back the left foot pedal.
To start sealing - press forward.
To change the speed of sealing – variable speed mode must be enable, ease back slightly from
the forward position. The speed of sealing is proportional to
the pedal position in the forward direction.
Right foot pedal
The right pedal is a simple switch. It performs different function according to the timing.
During idle – jog function that makes the rollers rotate forward without the nozzle coming in.
During sealing – cut function that cuts the tape