USING THE AUDIO LINE IN CONNECTION (DVD/ AUX)
- YOU CAN CONNECT THE AUDIO OUTPUT OF AN EXTERNAL DEVICE SUCH AS A
DVD PLAYER TO THIS UNIT, TO LISTEN TO THE SOUND OF THAT DEVICE (DVD)
THROUGH THE HIGH QUALITY AMPLIFIER OF THIS MUSIC SYSTEM.
- TO CONNECT THE EXTERNAL DEVICE (eg. DVD PLAYER) PLEASE USE A
STANDARD RCA CABLE TO CONNECT THE "AUDIO LINE-OUT" OF THE DEVICE
(LEFT AND RIGHT CHANNELS) TO THE "AUX/DVD AUDIO LINE-IN" RCA JACKS
(LEFT AND RIGHT) ON THE REAR PANEL OF THIS UNIT.
- SWITCH THE FUNCTION SELECTOR TO "AUX" ON THE FRONT PANEL.
- MAKE SURE THAT THE SPEAKERS ARE CONNECTED TO THE MAIN UNIT.
- SWITCH ON THE POWER OF THE MAIN UNIT AND THE EXTERNAL DEVICE
(DVD PLAYER).
- START PLAYBACK OF THE EXTERNAL DEVICE (DVD) AND ADJUST THE VOLUME
CONTROL OF THE MAIN UNIT TO THE DESIRED LEVEL.
- REMEMBER TO SWITCH OFF THE POWER OF THE MUSIC SYSTEM (MAIN UNIT)
WHEN YOU ARE FINISHED USING THE EXTERNAL DEVICE.
ANTI-SKIP (ANTISHOCK) FUNCTION [ESP]
- THIS UNIT HAS A BUILT-IN DIGITAL ANTI-SKIP FUNCTION WHICH PREVENTS
CD "SKIPPING" WHEN THE UNIT IS PHYSICALLY MOVED OR SUBJECTED TO
VIBRATIONS FOR UP TO 100 SECONDS.
- WHENEVER ANY CD OR CD-MP3 DISC IS PLAYED , THE DISPLAY WILL
INDICATE A FLASHING SYMBOL FOR ABOUT 50 SECONDS. THIS
MEANS THAT THE ANTI-SKIP MEMORY IS BEING FILLED UP (BUT IS NOT
YET FULL). THE ANTI-SHOCK PROTECTION IS ALREADY ACTIVE (IN USE) AT
THIS TIME, BUT IS NOT YET UP TO THE MAXIMUM 100 SECONDS CAPACITY.
- ONCE THE SYMBOL STOPS FLASHING, THE ANTI-SHCOK MEMORY IS
FULL & THE UNIT NOW PROVIDES ANTI-SKIP PROTECTION FOR 100
SECONDS OF VIBRATION.
- PLEASE NOTE THAT THE ANTI-SKIP FUNCTION ONLY PROTECTS AGAINST
NORMAL VIBRATION OR MINOR MOVEMENT. SEVERE OR STRONG SHOCKS/
VIBRATIONS TO THE UNIT MAY STILL CAUSE SKIPPING.
ESP
ESP
E-17
E-18
THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING
AND NO OBJECTS FILLED WITH LIQUIDS SHOULD BE PLACED ON THE
APPARATUS.
SPECIFICATIONS
AC-POWER SUPPLY : ...................................... AC 110V/220V , 50/60 Hz
AC-POWER CONSUMPTION : ..........................32W
REMOTE CONTROL UNIT : ................................3V (AAA SIZE/ UM-4/ LR03/ R03G x 2 PCS)
(BATTERIES NOT INCLUDED)
SPEAKER : ......................................................... 4” x 2 1½” X 2 TWEETER
SPEAKER CAPACITY POWER : .........................@ 4 Ohm
AMPLIFIER MAXIMUM POWER : ....................... 10 W
~
AS WITH ALL CD-PLAYERS, THIS SYSTEM USES A LASER DEVICE
DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL
INSTRUMENTS
CONNECTING AN EXTERNAL POWERED SUBWOOFER
(NOT INCLUDED)
- THIS UNIT HAS A BUILT IN SUBWOOFER CONNECTION WHICH CAN BE
CONNECTED TO ANY STANDARD POWERED SUBWOOFER.
- BY CONNECTING TO A POWERED SUBWOOFER, THE LOW FREQUENCY
(BASS SOUND) CAN BE STRONGLY ENHANCED TO PROVICE A MUCH RICHER
AND DEEPER SOUND TO YOUR MUSIC.
- TO USE THIS FACILITY, SIMPLY CONNECT ANY STANDARD POWERED
SUBWOOFER (EASILY AVAILABLE FROM MOST MUSIC EQUIPMENT SHOPS)
USING THE RCA JACK ON THE REAR PANEL OF THE MAIN UNIT.
- SWITCH ON THE POWERED SUBWOOFER.
- PLAY ANY MUSIC SOURCE (CD or RADIO or AUX) AS USUAL.
- YOU WILL IMMEDIATELY NOTICE THE DEEPER SOUND, WHICH CAN BE
FURTHER ENHANCED BY SWITCHING ON THE "SUPER BASS" FUNCTION ON
THE MAIN UNIT.
- PLEASE NOTE THAT THE SPEAKERS SHOULD BE CONNECTED AS USUAL TO
THE MAIN UNIT, WHEN USING A SUBWOOFER.
- PLEASE NOTE THAT "PASSIVE" (NON-POWERED) SUBWOOFERS WILL NOT
WORK WITH THIS UNIT.
