[email protected]
handandeyestudio.co.uk
©Oc
tober 2022
Lighting for all the senses.
Isla
Safety Information EU/UK
• Please read the instructions before assembly or
installation.
• Make sure mains power is OFF during installation.
• Be sure to use a suitably qualified person for
installation as the lights require connecting to mains
power.
• Install the light to all relevant local building codes and
standards.
• Note the integrated LED modules are low voltage
LEDs with a remote driver/transformer required..
• Ensure the driver provided is used at the correct mA
setting as incorrect drivers or driver settings can
damage the LED and cause overheating.
• Make sure the wall is suitably prepared to ensure a
solid fixing method and substrate.
• The ceramic shades are breakable and should be
treated suitably.
• Do NOT touch the LED surface if the lens cap is
removed.
• Do NOT touch the LED module when turned on if the
lens cap has been removed or broken.
• Do NOT disassemble the LED module from the
heatsink.
• Do NOT bring the lamp in contact with water or locate
the lamp in a wet location.
• If the cables are damaged, these must only be
replaced by the manufacturer or a similarly qualified
person.
• Used electrical equipment (WEEE) should not be
mixed with general household waste. Please recycle.
Our products can be dismantled prior to disposal.
• For LED module replacements contact Hand & Eye.
