manualshive.com logo in svg

Hand Held Products SV Series, Руководство пользователя

Поделиться
Скачать
Hand Held Products SV Series Скачать руководство пользователя страница 51

Quick Check® SV Series User’s Guide

6 - 3

Note: Other Data Match Fields and Fill characters can follow for up to 32 

characters total length.

Examples

Note: In the above examples, the character ‘x’ (defined as the fill character) 

cannot be included in the portion of the bar code data that is programmed 
to be matched.

~ Brnbb{ ..  + 0-9..  ! ....  )

Define increment or decrement data check  

One array is available for checking a numeric (base 10) or alphanumeric (base 
36) incrementing or decrementing field.  The data field being checked must be 
fixed length.  Portions of a field can be checked through masking.  An initial 
(starting) value for the field may also be programmed in the array.  Total field 
length can be up to 32 characters maximum.  Characters analyzed can be 
numeric or alphanumeric (0-9, A-Z).  This command can be used in conjunction 
with the ~BC command.

~BC005xfABCDE

Data match array #0 with 5 characters of  
“ABCDE” of fixed length with ‘x’ as the ignore or 
fill character.  In this case, the ‘x’ must be in the 
command, but is not used

~BC210xfxxxABCDExZ

Data match array #2 with 10 characters of fixed 

length.  ‘x’ as the ignore or fill character.  The 4

th

 

through 8

th

 characters must be ABCDE respec-

tively and the 10

th

 character must be a Z in a 10 

character field for a data match.

~BC004xvx111

Data match array #0 is defined as variable length, 
therefore can be up to 32 characters long.  ‘x’ is 

the fill character.  The second through 4

th

 charac-

ters all must be 1 for a match.

~BC000bc

Disable Data match array #0.  Any proper charac-
ter as described above can be used for the b and 
c characters.  The remainder of the array data is 
not required.

~B

Command initiation for checking an incrementing data field

r

Indicates incrementing (I) or decrementing (D) function

n

Required digit following ~Br.  If set to a ‘0’ (zero), the check 
is performed for digits 0-9 only.  If set to 1, the check is per-
formed for alphanumeric characters 0-9, A-Z.

Содержание SV Series

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды