Hand Held Products NAUTIZ X7, Быстрый старт

Страница: 9 / 12

Be sure to fully charge the battery before using your device for the
first time.
Getting Your Device Ready for Use
1. Plug the DC cord of the
AC adapter into the power
connector of the device ( ).
2. Plug the female end of the AC
power cord into the AC adapter
and the male end into an
electrical outlet ( ).
3. The charge indicator glows
in amber when charging is in
progress. Do not disconnect
your device from AC power until
the battery is fully charged, as
indicated by the amber indicator
turning into green. This will take
a couple of hours.
1
1
2
2
Connecting to AC Power and Charging the Battery
CAUTION: For optimal performance of the lithium battery, take note of the
following:
• Use the included AC adapter only.
• There is no need to fully discharge the battery before charging. You can charge the
battery before it is discharged.
• Do not charge the battery where the temperature is high (e.g. in direct sunlight).
• As a protection against damage, your device stops charging when the battery’s
temperature is extremely high or low. In high temperature conditions, the charging
stops when the battery’s temperature gets above 70 °C (158 °F) and continues when
the temperature lowers to 60 °C (140 F). In low temperature conditions, the charg-
ing stops when the temperature gets below -5 °C (23 °F) and continues when the
temperature rises to 0 °C (32 °F).
• If you will not use the product for a long period of time, be sure to fully charge the
battery at least once every two weeks. Over discharge of the battery can affect the
charging performance.