![background image](http://html1.mh-extra.com/html/hand-held-products/dolphin-9500-series/dolphin-9500-series_quick-start-manual_589752008.webp)
4
Dolphin® 9500 Series Quick Start Guide
Setting Up Dolphin 9500 Series Terminals
1. Unpack the carton and verify its contents - page
.
2. Install the battery in the terminal - page
3. Charge the main battery in the terminal for a minimum of four hours - page
.
4. Wake the terminal and initialize the mobile computer - page
.
5. Allow AutoInstall to run (page
) and end on the Today screen.
Unpack the Carton and Verify its Contents
Verify that the carton contains the following items:
•
Dolphin 9500 Series mobile computer (the terminal)
•
Main battery pack (7.4v Li-ion)
•
Microsoft Companion CD-ROM
•
Dolphin 9500 Series Quick Start Guide
Be sure to keep the original packaging in the event that the Dolphin terminal
should need to be returned for service - see page
Each order includes a Dolphin Software Development Kit and User’s Guide CD;
verify that you received this CD with your order.
If you ordered accessories, verify that they are also included with the order.
Dolphin 9500/9501 Hand Strap
The Dolphin 9500/9501 ship with the hand
strap installed and fastened with a clip on the
bottom panel.
To install the battery pack, you must detach
the hand strap.
Push the clip of the hand strap down and
away from the terminal. Move the strap up
and away from the bottom panel.
To re-attach the hand strap, slide the clip
back into place on the bottom panel.
Clip
Hand Strap