manualshive.com logo in svg

Hand Held Products Dolphin 7900, Руководство пользователя

Поделиться
Скачать
Hand Held Products Dolphin 7900 Скачать руководство пользователя страница 38

3 - 12

Rev D

Dolphin® 7900 Series User’s Guide

Checking Battery Power

Tap 

Start 

> 

Settings 

> 

System 

tab

 > Power

. The Battery tab opens displaying the charge status of both the installed Li-ion 

battery pack and the NiMH backup battery inside the terminal.   

For more information, see 

Power

 on page 

7-10.

Storing Batteries

To maintain optimal battery performance, follow these storage guidelines:

•           Avoid storing batteries outside the specified range of -4 to 104° F (-20 to 40°C) or in extremely high humidity.
•           For prolonged storage, do not keep batteries stored in a charger that is connected to a power source. 

Guidelines for Battery Use and Disposal

The following are general guidelines for the safe use and disposal of batteries:

•           Use only the battery supplied, recommended, or approved by Hand Held Products. 
•           Replace defective batteries immediately; using a defective battery could damage the Dolphin terminal.
•           Never throw a used battery in the trash. It contains heavy metals and should be recycled according to local guidelines. 
•           Don’t short-circuit a battery or throw it into a fire. It can explode and cause severe personal injury.
•           Excessive discharge damages a battery. Recharge the battery when your terminal indicates low battery power.
•           Although your battery can be recharged many times, it will eventually be depleted. Replace it after the battery is unable to 

hold an adequate charge.

•           If you are not sure the battery or charger is working properly, please send it to Hand Held Products or an authorized Hand 

Held Products service center for inspection.

 

Содержание Dolphin 7900



















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды