manualshive.com logo in svg

Hand Held Products 4800p, Руководство пользователя

Поделиться
Скачать
Hand Held Products 4800p Скачать руководство пользователя страница 168

14 - 4

4800p 2D Imager User’s Guide

ANY PRODUCT SOLD HEREUNDER (WHETHER SUCH LIABILITY ARISES 
FROM A CLAIM BASED ON CONTRACT, WARRANTY, TORT, OR 
OTHERWISE) EXCEED THE ACTUAL AMOUNT PAID TO HAND HELD 
PRODUCTS FOR THE PRODUCT.  THESE LIMITATIONS ON LIABILITY 
SHALL REMAIN IN FULL FORCE AND EFFECT EVEN WHEN HAND HELD 
PRODUCTS MAY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH 
INJURIES, LOSSES, OR DAMAGES.  SOME STATES, PROVINCES, OR 
COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF 
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE 
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

All provisions of this Limited Warranty are separate and severable, which means 
that if any provision is held invalid and unenforceable, such determination shall 
not affect the validity of enforceability of the other provisions hereof.  Use of any 
peripherals not manufactured/sold by Hand Held Products voids the warranty. 
This includes but is not limited to: cables, power supplies, cradles, and docking 
stations. Hand Held Products, Inc. extends these warranties only to the first end-
users of the products.  These warranties are nontransferable.  

The limited duration of the warranty for the 4800p is for five (5) years.

Содержание 4800p

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды