HANCHU ESS HOME-ESS-LV-5.12K, Руководство пользователя, Страница: 20 / 37

HOME-ESS-LV-5.12K
Empowering Energy Clean And Affordable
17
Step 2: Fix the wall mount bracket
Fit the expansion tubes into the holes, pull them tight, and then use the expansion screws (packaged with
expansion tube for use) to install and secure the wall mount bracket to the wall.
Figure 10
Sample of Step 2 For Wall Installation
Step 3: Fix the battery module
There is a hook design on the back of the battery box, align and fix it to the positioning groove of the wall
bracket for firm support. The distance between the batteries is 300-350mm, and the distance between the
battery and the inverter is not less than 400mm.
Figure 11
Sample of Step 3 For Wall Installation
4.4 Electrical Connections
Before connecting the cables, use a multimeter to measure cable continuity, short circuits, and verify positive
and negative terminals and cable labelling.