8
before starting, please connect the hard disk connection stable well, after installation, the hard disk should be formatted before recording.
In
addition, if you need long-distance transportation, please remove the hard drive to avoid the hard disk damage.
Attentions: If it’s not convenient to connect the hard disk data stable and power stable, we can link the stable firstly and then firm hard disk on the device;
In addition, the machine cover for the clamshell design, we must aim at the middle of card buckle and then cover down.
5. System On/Off/Log in
(1). System On
After electrify, if the power indicator lamp on the front panel show red, please slightly press the power switch button on the front panel, start the
host, the “Power” indicator lamp on the front panel change green from red, the host start success.
Notice: If the power indicator lamp on the front panel do not turn bright, please link the power line to the host, turn the power switch on, start
the device.
(2). System Off
On Log on state, click the right mouse button to show the menu, choose "Off" items by clicking left mouse button, and then log off arccording to
the prompt operation; Or press the power button on the front panel or remote controller, the host show a shutdown prompt interface, click on the
confirmation, you can shut down the system (note: If the software needs to be turned on after shutdown, please press the power button on front
panel or the remote controller)
(2). System Login
Default user name: admin, password: 888888; After Login, the system is on lock state, click the right mouse button, show the Login interface,
input correct user name and password then you can login successful; The locking mark will automatically switch to the landing marks on the
lower left, user can operate on the system. (note: Various operation of the system should be under Login state.) The interface showed as below:
