Instructions
A. Casts of the upper and lower dentition are prepared in your
customary manner.
B. Secure the lower model first. Loosen the lower attaching
screw, insert the model, lining up the midline indicator
with the dental midline, and tighten the screw.
C. Follow the above instructions for the upper model.
D. Loosen the anterior/posterior adjustment knob and flip the
lever forward. This will allow free movement of the upper
model in all directions.
E. Position the upper model into the lower model (centric
occlusion) and lock the anterior/posterior adjustment knob
making sure the flat side of the slide bar is parallel to the
floor*. Close the lever by pushing it backwards.
F. Turn the vertical adjustment screw (found in the rear of
the articulator) to raise or lower the vertical dimension of
occlusion. Once the casts are in proper position, lock into
place by rotating the lock washer until contact is made with
the articulator and secure in place.
* Once the model is locked, if the cast is able to move sideways the
anterior/posterior slide bar is not in its correct parallel location.
Содержание Mate
Страница 1: ...I n s t r u c t i o n s f o r U s e...
