IPT Manaul V2.0
05-09-2012
5
Sample Preparation
Sled Sample-
Cut a sample 64mm x 64mm
This can be either rested under the foam bed during test.
Alternatively it can be fixed to the foam bed with a small piece of double
sided tape.
Bed Sample-
Cut a sample with a width of 70mm-100mm and between
80-180 mm long, hold it in place with the small magnets.
Placing the Sled
The sled should be placed with the two faces of the sample in contact.
The Black flag at the top of the sled should be placed in the optical sensor
as shown.
