Contents
System Installation
System Introduction
BIOS
Appendix
Using the product
Stand
Rear Cover
HDD
EMI
9.7” Dual monitor
15” Dual monitor
Wall mount
NFC
Barcode Scanner
MSR
Assembly &
Disassembly
BARCODE SCANNER - Step 2
1) Please avoid setting when the store is crowded. Please set-up forehand before the store opens or after the store is closed.
When start to set-up, stop and save all of your work.
2) When you are about to proceed to next step, please make sure that the switch of the barcode scanner is visible and
then seperate the cover. (Please refer to the installation guide)
Since you have reset the default settings, you need to press the switch and scan.
● BARCODE SCANNER Reset Default GuideaA
Please read the direction carefully and safely set up the product accordingly.
Please follow the procedure below.
1. Reset Default Settings
2. Enter Programming Mode
3. Object Detection Mode
4. Exit Programming Mode
Switch
