Hamron 601-007, Инструкция по эксплуатации

Страница: 8 / 10

ENGLISH
8
ENGLI SH
SAFETY INSTRUCTIONS
Read the Instruction manual carefully before use
IMPORTANT:

Never exceed the maximum permitted load.

The load’s centre of gravity must be centred above the jack’s centre of gravity.

Always secure the load with the safety chain.

Always support the load when working under a raised load.

Check regularly that there is sufficient oil in the hydraulic system.

The saddle must be in the lower position when removing the jack.

Keep all moving parts lubricated.

Loosen the locking screw before using the transmission jack.

Tighten the locking screw when the transmission jack is not used.

Always support a raised load when working.
TECHNICAL DATA
Maximum permitted load 500 kg
Max. saddle height 1,900 mm
Min. saddle height 1,100 mm
Saddle angle 60° forwards
10° backwards
Weight 37 kg
DESCRIPTION
1. Saddle
2. Piston
3. Cylinder
4. Wheel set
5. Foot-operated pump
6. Wheel
USE
This is a compact, lightweight, durable hydraulic jack with a long stroke. The product is used for lifting,
lowering and transporting transmissions. It is ideal for repair work in a workshop or garage.
The transmission jack can be used with or without the saddle.
Installation
1. Install the four ball-
bearing mounted wheels on wheel set’s feet and tighten the screws.
2. Screw the parts of the wheel set together using three screws.
3.
Undo the cylinder’s three screws, place the cylinder on the wheel set and tighten the three screws.
4. Place the handle rings on the cylinder and secure them with four screws.