18
Attaching wire to the drum
The wire must be attached to the drum with a wire clamp.
Do not pull the wire out fully when it is loaded. It must be wrapped 4 times around the winch drum. This is
to prevent the wire coming off the drum.
Installing the winch
The winch must be installed on a surface that can withstand a load equal to at least the maximum
working load of the winch. The winch must be installed with three M10 bolts and lock nuts.
Subject to printing errors and design changes over which we have no control. In the event of problems,
please contact our service department.
www.jula.com
