Hamron 016574, Руководство по эксплуатации, Страница: 8 / 8

EN
8
3. Wheel support
4. Wheel holder
5. Pin
FIG. 1
ASSEMBLY
1. Fit the feet (2) on the base frame (1) with
the screws, nuts and washers.
2. Fit the wheel support (3) on the base
frame (1) with one of the pins (5) and
R-clips, with the screws, nuts and washers.
3. Place the wheel holder (4) in the required
position, fasten it with one of the pins (5),
and lock the pin with R-clips.
FIG. 2
FIG. 3
FIG. 4
FIG. 5
FIG. 6
NOTE:
The wheel holder (4) can be moved
backwards and forwards to suit different
front wheel diameters. Measure the front
wheel diameter of the motorbike and check
that the wheel fits to the wheel support (3)
and wheel holder (4).
MAINTENANCE
• Check at regular intervals that the product
is undamaged and working properly.
• Lubricate moving parts when necessary.
• Wipe with a soft cloth and clean if
necessary with a mild detergent.
SAFETY INSTRUCTIONS
• Read and make sure you understand the
safety instructions and operating
instructions before using the product.
Failure to do this can result in personal
injury and material damage.
• The product must be well supported
before it is used.
• Choose the position with care. There
should be enough space on both sides of
the product for a motorbike to be rolled in
and out of the support easily and safely.
• The supporting surface should be level,
stable and with a sufficient bearing
capacity for a heavy motorbike.
• Never make any modifications to the
product.
• Do not use the product if it is damaged,
or not working properly.
• Make sure that wind or other external
factors cannot put stability at risk when
using the product.
TECHNICAL DATA
Max load 450 kg
Size L77.5 x W61 x H40 cm
Weight 9.5 kg
DESCRIPTION
The product is a means of standing and storing
motorbikes. It holds the front wheel in place
and the motorbike upright. The product is also
self-locking and suits most models with rim
sizes from 15-22 inches and tyre dimensions
from 500-750 mm. The product offers six
different settings and adjustable positions.
There are predrilled holes for permanent
attachment.
1. Base frame
2. Foot