Hamron 014896, Руководство по эксплуатации

Страница: 19 / 20

EN
19
product and apply the 3M foam rubber tape on
the mounting surface. Press on firmly to fasten
the tape. The product bends to the shape of the
surface.
3. Connect the black wire to the chassis (earth)
and the black/white wire to +12V on the vehicle,
either by connecting to an ignition switch circuit
(fig. 1) or a separate switch (fig. 2).
FIG. 1
1. Black wire – chassis (earth).
2. Black/white wire – ignition switch circuit.
FIG. 2
1. Black wire – chassis (earth)
2. Black/white wire
3. Constant 12 V (not ignition switch)
4. Cut to the right length: the product must only be
cut at the points marked with a scissor symbol.
FIG. 3
NOTE:
• The product must not be folded and cannot be
mounted in sharp corners.
FIG. 4