EN
7
2. Fit the bracket halves loosely round
the post with M8 screws, adjust to the
required position and then screw tight.
FIG. 3
3. Fit the mirror bracket loosely in the
bracket with M8 screws, adjust the angle
and position of the mirror and then
tighten the screws.
FIG. 4
MAINTENANCE
• Clean the product at regular intervals with
a soft cloth moistened with water and
wipe dry with a soft cloth.
• Carefully clean the polycarbonate plastic
mirror surface with water and allow to dry.
IMPORTANT:
Do not use solvent, strong, corrosive or
abrasive detergent, or abrasive or scratching
utensils when cleaning to avoid damaging
the product and reducing its functionality.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Size
Ø 60 cm
Wide angle
160⁰
Mirror material
polycarbonate
Bracket adjustable
DESCRIPTION
Exit mirror to improve safety at crossings and
exits from parking lots and garages. It has an
aluminium-reinforced screen and adjustable
post bracket (Ø 50-85 mm).
ASSEMBLY
NOTE:
The mirror is delivered with the mirror
surface covered with protective film. Do not
remove the protective film before completing
and checking the installation.
FIG. 1
1. Screw the right and left parts of the mirror
bracket on the back of the mirror, with the
slot turned down.
FIG. 2
Содержание 012112
Страница 3: ...1 3 2 4...
