EN
7
2. Mark out and drill holes in the wall
and screw on the wall bracket with M8
expander screws.
FIG. 3
3. Fit the support arm, wall bracket and
mirror bracket loosely together with M8
screws, adjust the angle and position and
then screw tight.
FIG. 4
MAINTENANCE
• Clean the product at regular intervals with
a soft cloth moistened with water and
wipe dry with a soft cloth.
• Carefully clean the polycarbonate plastic
mirror surface with water and allow to dry.
IMPORTANT:
Do not use solvent, strong, corrosive or
abrasive detergent, or abrasive or scratching
utensils when cleaning to avoid damaging
the product and reducing its functionality.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Size
Ø 30 cm
Wide angle
160⁰
Mirror material
polycarbonate
Bracket adjustable
DESCRIPTION
Exit mirror to improve safety at crossings and
exits from parking lots and garages. It has an
aluminium-reinforced screen and adjustable
wall bracket.
ASSEMBLY
NOTE:
The mirror is delivered with the mirror
surface covered with protective film. Do not
remove the protective film before completing
and checking the installation.
FIG. 1
1. Screw the right and left parts of the mirror
bracket on the back of the mirror, with the
slit turned down.
FIG. 2
Содержание 012111
Страница 3: ...1 3 2 4...
