EN
10
ASSEMBLY
WITH 4 WIRES
RED: +VDC
BLACK: - Ground
YELLOW: Flash pattern selection.
WHITE: Synchronization. Connect White wires
of all heads together for synchronization.
USE
CHOICE OF FLASHING PATTERN
• Less than 1 second for next pattern
• 1 to 3 seconds for previous pattern
• 3 to 5 seconds back to pattern #1
• More than 5 seconds for turn off, when
power is reapplied it will resume the
previous pattern.
Table of flashing patterns
#1
Single flash (R65)
#2
Double flash (R65)
#3
Triple flash (R65)
#4
Quad flash (R65)
#5
Eight flash
#6
Single flash half to half (R65)
#7
Double flash half to half (R65)
#8
Triple flash half to half (R65)
#9
Quad flash half to half (R65)
10
Eight flash half to half
#11
Cross flash
#12
All-half flash
#13
All-Single-Quick flash
#14
CCW Single flash
#15
CW Single flash
#16
CCW constant flash
SAFETY INSTRUCTIONS
CHARGING
Make sure to do the charging in a suitable
place and that the right charger is used. Never
connect an unknown charger, or a charger,
charging cable or battery that can be suspected
to be defective. Otherwise there is a risk of
overheating, and in the worst case fire. Do not
leave the battery unattended when charging.
WARNING!
• Do not look into the light without
wearing eye protection, risk of dazzling
and/or eye damage.
• Magnetic mounting of warning devices is
not recommended for moving vehicles.
Screw mounting is recommended for
moving vehicles. Use is at the discretion
of the user.
TECHNICAL DATA
Voltage
12–24 VDC
Number of LEDs
90
Flashing patterns
26
Protection rating
IP65
Temperature
-30 to 60°C
Length
600 mm
Colour yellow,blue,white,green,red
Cable routing
With vehicle connection 12 V
Approval ECE R10, ECE R65 (Amber&Blue&Red)
DESCRIPTION
1.
Power switch
2. Flashing pattern button
FIG. 1
Содержание 006838
Страница 3: ...1 1 2...
