HAMPTON BAY YG188-NI Скачать руководство пользователя страница 9

1

Preparing the Canopy

2

Preparing the Motor

9

      

Remove the canopy ring (B) from the canopy (C).

      

Remove the two non-slotted canopy mounting 
screws with lock washers (BB) from the canopy (C), 
and loosen the slotted canopy mounting screw with 
lock washer (BB) on the canopy (C).

     

 

Remove the canopy (C) from the mounting bracket 
(A) by turning the canopy (C) counter-clockwise.

A

BB

BB

C

B

     Remove the cotter pin (FF) and clevis pin (EE), then 

loosen the two collar set screws (GG) from the fan 
motor assembly (G) collar.

FF

G

EE

GG

GG

 

3

Assembling the Fan

F

G

FF

EE

GG GG

E

C

B

WARNING:

 Failure to properly install the cotter pin (FF) 

could result in the fan loosening and possibly falling.

NOTE:

 If a longer downrod is needed (not included), take 

out the screw located in the hanger ball, lower the hanger 
ball, and remove the pin. Remove all three pieces from the 
downrod and assemble them onto the new longer downrod 
before proceeding to the downrod installation.

     Route the wires exiting from the top of the fan motor 

assembly (G) through the coupling cover (F). Ensure 
the slot openings are on top.

     Route the wires through the coupling cover (F), 

canopy ring (B), canopy (C), and then through the 
hanger ball/downrod assembly (E).

     Align the holes at the bottom of the hanger 

ball/downrod assembly (E) with the holes in the collar 
on top of the fan motor assembly (G). 

     Carefully insert the clevis pin (EE) through the holes 

in the collar and the hanger ball/downrod assembly 
(E). Be careful not to jam the clevis pin (EE) against 
the wiring inside the hanger ball/downrod assembly 
(E). 

     Insert the cotter pin (FF) through the hole near the 

end of the clevis pin (EE) until it snaps into the locked 
position.

     Firmly tighten the two collar set screws (GG) on top of 

the fan motor assembly (G).

Assembly — Standard Ceiling Mounting

Содержание YG188-NI





















Отзывы: