![background image](http://html1.mh-extra.com/html/hampton-bay/wellton-60-am588a-bn/wellton-60-am588a-bn_use-and-care-manual_4202947016.webp)
11
Attaching the light kit mounting
plate to the mounting ring
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
Assembly — Installing the Light Kit
12
Attaching the light kit to
the light kit mounting plate
16
H
SS
K
HH
H
K
L
II
TT
□
Remove one of the three light kit mounting plate
screws (HH) from the mounting ring (SS) and loosen
the other two screws. (Do not remove.)
□
Place the key holes in the light kit mounting plate (K)
over the two screws (HH) previously loosened from
the mounting ring (SS). Turn the light kit mounting
plate (K) until the light kit mounting plate (K) locks in
place at the narrow section of the key holes.
□
Securely tighten the two light kit mounting plate
screws (HH) previously loosened and the one (HH)
previously removed.
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
□
Remove three light kit mounting screws (II) from the
mounting plate (K).
□
While holding the light kit (L) under the fan motor
assembly (H), snap together the wire connection
plugs (TT).
□
Secure the light kit (L) to the mounting plate (K) with
the three light kit mounting screws (II) previously
removed.