HAMPTON BAY Tripoli II, Руководство пользователя

Страница: 13 / 18

10
Installing the Light Kit
Remove the 1 of 3 screws from the posts of the
light kit decorative housing and keep it for
future use. Loosen the other 2 screws. (Do not
remove)
Place the key holes on the light plate over the 2
screws previously loosened, turn the light plate
until it locks in place at the narrow section of
the key holes. Secure by tightening the 2
screws previously loosened and the one
previously removed. (Fig. 17)
1.
2.
While holding the LED light kit under your
fan, make the polarized plug connections:
- Red to white
- Black to black
Remove the 1 of 3 screws from the light plate
keep it for future use. Loosen the other 2
screws. (Do not remove)
Place the key holes on the LED light kit over
the 2 screws previously loosened, turn the light
kit until it locks in place at the narrow section
of the key holes. Secure by tightening the 2
screws previously loosened and the one
previously removed. (Fig. 18)
Raise glass shade up against the mounting
plate and secure it to fan by turning glass
counterclockwise until snug. DO NOT OVER-
TIGHTEN. (Fig. 18)
Restore power and your light kit is ready for
operation.
3.
4.
5.
6.
7.
CAUTION
BEFORE STARTING INSTALLATION, DISCON-
NECT THE POWER BY TURNING OFF THE
CIRCUIT BREAKER OR REMOVING THE FUSE
AT FUSE BOX. TURNING POWER OFF USING
THE FAN SWITCH IS NOT SUFFICIENT TO
PREVENT ELECTRIC SHOCK.
LED Light Kit
Glass Shade
Figure 18
Screws
Light Kit
Decorative
Housing
Light Plate
Figure 17
WARNING
SHUT OFF THE POWER SUPPLY BEFORE
REMOVING OR REPLACING LAMP. IN
HANDLING OF LED BULB, CARE SHOULD BE
TAKEN NOT TO TOUCH IT WITH YOUR BARE
HANDS. OIL RESIDUE WILL SHORTEN THE
LIFE OF THE LED BULB. IF YOU ACCIDEN-
TALLY COME INTO CONTACT, WIPE THOR-
OUGHLY WITH A CLEAN, LINT-FREE, COTTON
CLOTH. ALLOW THE BULB TO COOL OFF FOR
10 MINUTES BEFORE CHANGING THE BULB.
USE LIGHT BULB IN ACCORDANCE WITH THE
FAN'S SPECIFICATION.
Wire
Connectors
Light Plate