Attaching the Fan
Blades
Step 1
Attach the blades to the blade arms
using the screws and rubber washers
provided as shown in Figure 14. Start a
screw into the
, but do not tighten.
Repeat for the other 2 screws and washers.
Step 2
Tighten each screw securely starting
with the center screw. Make sure the blade
is
straight.
Step
3
Fasten the blade assemblies to the
motor by insert the tab from the blade
s
to the slot in the bottom motor housing, then
tighten the two screws and washers already
installed in the blade
s (Figure 15).
Step 4
Install an optional light kit if you wish.
Follow the instructions included with the kit.
arm
arm
arm
8.
Rubber
washer
Blade
arm
Figure 14
Motor
Blade arm
Slot
Tab
Figure 15
Screws
