
10
Installing the Light Kit
1.
2.
3.
4.
5.
CAUTION
BEFORE STARTING INSTALLATION,
DISCONNECT THE POWER BY TURNING OFF
THE CIRCUIT BREAKER OR REMOVING THE
FUSE AT FUSE BOX. TURNING POWER OFF
USING THE FAN SWITCH IS NOT SUFFICIENT
TO PREVENT ELECTRIC SHOCK.
Mounting
Plate
Wire Connectors
Light Kit Assembly
Screws
Figure 15
Remove 1 of the 3 screws from the mounting
plate and loosen the other 2 screws. (Do not
remove)
While holding the light kit assembly under
your fan, snap together the wire connection
plugs.
Place the key holes on the light kit assembly
over the 2 screws previously loosened from the
mounting plate, turn light kit assembly until it
locks in place at the narrow section of the key
holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed. (Fig. 15)
Install 3 x 40W candelabra bulbs (included).
Remove the decorative nut, glass cap and
metal nut from the light kit stem. Raise the
glass shade up against the mounting plate and
secure it with the metal nut. (rubber side on the
top) Do not overtighten. Place the glass cap
over the light kit stem and secure it with the
decorative nut. (Fig. 16)
6.
7.
Insert the 2 pull chain through the eyelet in the
shade and cap. Secure the glass cap and
decorative nut provided (Fig. 16).
Restore power and your light kit is ready for
operation.
NOTE
LIGHT BULBS HAVE NO WARRANTY; CAN BE
PURCHASED AT ANY HOME DEPOT STORE.
Light Kit
Assembly
Bulbs
Glass Shade
Pull Chains
Metal Nut
Decorative Nut
Glass Cap
Figure 16
NOTE
MAKE SURE TO LEAVE ENOUGH SPACE
BETWEEN THE FAN PULL CHAIN AND THE
BULBS SO THE CHAIN DOESN'T RUB AGAINST
ANY OF THE BULBS.
Содержание Sedalia II
Страница 2: ...Sedalia II by Hampton Bay ...