manualshive.com logo in svg

HAMPTON BAY SEAPORT AL634-WH, Инструкция по использованию и уходу

Поделиться
Скачать
HAMPTON BAY SEAPORT AL634-WH Скачать руководство пользователя страница 13

Assembly — Attaching the Fan Blades

9

Attaching the blades to the 
blade arms

10

Fastening the blade 
assemblies to the motor

□

      Fasten the blade assemblies to the fan motor 

assembly (F) by lining up the slots of the blade arms 
(H) with the tabs on the motor, then tighten the two 
screws and lock washers (II) already installed in the 
blade arms (H).

□

      Repeat procedure with remaining blade arms (H).

□

     Attach blades (G) to blade arms (H) using the 3 

screws with rubber washers provided with the blade 
attachment hardware (AA).  Start a screw with rubber 
washer (AA) into the blade arm (H), do not tighten. 
Repeat for the 2 remaining screws and rubber 
washers (AA).

□

     Tighten each screw securely starting with the center 

screw.  Make sure the blade (G) is straight.  Repeat 
steps for the remaining blades.

WARNING:

 To reduce the risk of personal injury, do not 

bend the blade arms(H) while installing, balancing the 
blades(G), or cleaning the fan.  Do no insert foreign objects 
between rotating fan blades(G).

G

II

H

F

13

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

AA

G

H

Содержание SEAPORT AL634-WH





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды