Backplate
6
Installation (continued)
Push all excess wires into the outlet box.
Align the holes in backplate with two mounting screws (DD),
and secure the fixture to the wall with two rubber washers
(HH) and two finials (GG).
Apply silicone or RTV compound between the edges of
backplate and wall.
4
Installing the fixture
□
□
□
EE
AA
3
DD
HH
GG
4
2
1
1
6
5
3
Connecting the wires
□
□
□
□
Install the fixture bare copper ground wire (1) under the
ground screw (EE) on the mounting plate (BB).
Connect the fixture bare copper ground wire (1) to the green
(or bare, or green & yellow) supply ground wire (2) in the
outlet box using a wire nut (AA).
Connect the white fixture wire (3) to the white (or ribbed)
supply wire (4) in the outlet box using a wire nut (AA).
Connect the black fixture wire (5) to the black (or red, or blue)
supply wire (6) in the outlet box using a wire nut (AA).
House wire
black
(or red, or blue)
(HOT)
House wire
white
(NEUTRAL)
Fixture wire
black
(HOT)
Fixture wire
white
(NEUTRAL)
Fixture wire
ground wire
(GROUND)
House wire
green
(or bare wire,
or green & yellow)
(GROUND)
A
