5
Deck Post Installation
1
Installing the solar lights
2
Preparing the solar lights
□
Position one of the solar lights (A) over a deck post
.
□
Attach the solar light (A) to the deck post by
inserting screws (AA) through the holes in the
bottom of the solar light (A) and into the deck post.
□
Repeat these steps for the other solar light (A).
NOTE:
To allow each battery to reach full capacity
and perform correctly, pull out the plastic tab and
place the solar light in full sunlight for the first 12
hours. Failure to do so can shorten the life of the
battery or operation of the light. On cloudy or rainy
days it may take several days for the batteries to fully
charge.
NOTE:
To protect the solar panel from damage, do
not use force during assembly. Keep the plastic
shades in the packaging until you need to install
them.
□
Remove the protective film from the solar panels
located on top of the cover (B).
□
Move the solar light (A) switches to the ON position.
